CNC Milling Cutting Machining Center Features:
- CNC Milling Cutting Machining Centre, designed to perform milling, drilling and cutting operations aluminium profiles.
- It is made up of an automatic magazine and a thrust feed system for profiles sized up to 6500 mm complete with profile clamping gripper drive.
- In the central part are situated the milling module and the cutting module.
- The CNC 4-axis milling module is equipped with 4pc electro spindles and 2pc Laser spray head, which are enables the whole contour of the workpiece to be machined, however it is oriented.
- The CNC 3-axis cutting module is made up of a Ø500 mm blade, with angle of +/-45°and 90°.
- It also comprises an automatic outfeed unit leading from the cutting unit to the unloading magazine.
- The unit is made up of a magazine with transverse belts for unloading machined work pieces.
- The Cutting unit with numerically controlled horizontal feed, with dia.500 mm blade and a wide cutting range: -45° , +45° and 90°.
- The cutting angle setting is fully automatic; the unit movement is controlled by a 3-axis CNC.Automatic bar feed and workpiece unloadingNumerically controlled, high precision and high speed bar positioning system.
- The system is complete with a gripper to block the profile with automatic feed into the center station.
- The loading and unloading belt magazines are used to load profiles with length of up to 6.0 m and offload lengths of up to 4.0 m.
- Milling unit P6500S is fitted with the spindle motor head and laser spay head work units interpolated on 4 axes can operate at the same time: X, Y, Z, A
- The high-frequency electrospindles are air-cooled, and Laser spray head with air compressor connection.
- The industrial label printer allows each cut profile to be identified with identifying features from the cutting list.
- In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.
CNC Milling Cutting Station Technical Parameters:
| Power supply | 380V/50HZ |
|---|---|
| Total Input Power | 28.5Kw |
| Air Consumption | 50L/min. |
| Cutting Spindle Motor | 3*3.0kw |
| Rotating Speed | 3200RPM |
| Size of Saw Blade | Φ500mm X Φ4.4mm X 120T diamond teeth |
| Cutting Length | 9260-6500mm |
| Cutting Angle | +/-45 and 90 degree |
| Cutting Height | 120x145mm |
| Accuracy | +/-0.05mm |
| Feeding Speed | 0-120m/min |
