KFC Door Handle Automatic Processing Machine Features:
- This machine is designed for the automated production of KFC door handles. Customized stamping dies, three holes at the top and bottom are stamped at the same time for high production effciency.
- Give the best automated production plan according to different customer workpieces. If there are aluminum parts suitable for punching-cutting, hydraulic punching is used, and the die is Customized according to the workpiece. If some are not suitable for stamping, spindle drilling-cutting is used. It can also be mixed: drilling-hydraulic punching-cutting. It depends on the aluminum parts.
- Customized profile rails according to drawings and workpieces.
- Excellent no-tail technology will not waste aluminum profiles.
- Production cycle: single 10-20 pieces/min.
KFC Door Handle Automatic Processing Machine Technical Parameters:
|
1 |
Power Voltage |
380V 50Hz 3P |
|
2 |
Power |
6.5Kw |
|
3 |
Air Pressure |
0.6-0.8Mpa |
|
4 |
Hydraulic Motor |
3.75Kw |
|
5 |
Hydraulic Pressure |
10-15Mpa |
|
6 |
Fuel Tank Capacity |
93L |
|
7 |
Drilling Motor |
2.2Kw Spindle Motor |
|
8 |
Dimension |
2000x1000x1700mm |
|
9 |
Weight |
650kg |
|
10 |
Conveyor |
2m x 2 |
