CNC Aluminum Shutter Drilling Machine Features:
CNC Drilling Machine For Aluminum is a new model for aluminum window door. It has some advantages as easy operation, CNC control feeding, high precision, adapt to different blinds, no need die, etc. This machine is mainly used for drilling shutter holes, especial the double shutter.
CNC Drilling Machine For Aluminum Technical Parameters:
| No. | Parameter | LZD1-17 | SD-300 |
|---|---|---|---|
| 1 | 1 Head | Automatic 1 Head | |
| 2 | Voltage | 380V 50Hz | 380V 50Hz |
| 3 | Power | 1.1Kw | 1.1Kw |
| 4 | Motor Speed | 1400rpm | 2840rpm |
| 5 | Router bit diameter | 3-7mm | 3-7mm |
| 6 | Processing Range | No limited | Max. auto feeding 200mm |
| 7 | Dimension | 1200x1900x1700mm | 1100x700x1600mm |
CNC Drilling Machine Advantage:
CNC Drilling Machine For Aluminum is used multi holes automatic drill on aluminum profiles. With a high-speed and more efficient, one-piece machine that allows users to drill profiles from a wide variety of materials. The machine has some advantages as easy operation, CNC control feeding, high precision, adapt to different blinds, no need mould.. Fortunately, newer machines are now equipped with built-in chip evacuation, polished flutes, and through-coolant technology.
This CNC Drilling Aluminum Machine is mainly used for drilling the various holes on the profiles by automatic feeding, specialized for multi holes drill work. The machine’s steady transmission and low labor intensity allow users to process aluminum profiles without putting too much strain on their bodies.
The CNC Drilling Machine For Aluminum can drill multiple holes at once and can drill at various depths. It can process long profiles and massive productions. The profile feeding is automatically with servo-motor control, each feeding dimension is completed accurate. The power-head installed with the multi-drilling head adapter and can drill a single hole or multiple holes at once. The machine is equipped with the servo system to control speed independently and accuracy. The maximum length of a profile workpiece can be whole length.
While a CNC Drilling Aluminum has a variable speed, its speed may be too low to drill a hole of the correct diameter. This is due to the fact that aluminum contain more than eleven percent silicon. Because of this, it is advisable not to drill aluminum with aluminum-based coatings, because these can react with aluminum under pressure and heat. Flowdrill bits are suitable for any CNC machine. The CNC drilling machine is specifically designed for aluminum.
Reviews
There are no reviews yet.